Realistic Water Droplet!

[凌乱の决心]

Step 1: Open up a stock image in Photoshop of any size and/or format. The best results for this tutorial usually involve images where water droplets would exist in real life. Putting a droplet on a newspaper, for example, would look downright silly.

When you are happy with your base image, make a droplet-shaped selection using the [Only registered and activated users can see links. ]. You can rotate your selection with Select > Transform Selection if you need a selection at an angle.



Step 2: Press CTRL+J on the keyboard to copy+paste the selected area into a layer of its own. Name this layer droplet or something else appropriate. Select the new layer in the layers palette, hold CTRL and click on the droplet layer again to re-select the elliptical shape. Once you have done this, run Filter > Distort > Spherize, and play with the setting until it looks good. Essentially, this filter recreates the underlying optical distortion of the water droplet.

With your droplet layer still selected in the layer's palette, choose Layer > Layer Style > Drop Shadow from the main menu and enter in the settings on the left.



Step 3: Without pressing the OK button, go to the Inner ShadowAngle of the effects should be changed to reflect the position of the light source in your underlying picture. In my example the light comes from the upper right, but this may be very different in your picture! When you are happy with the result, press OK.

NOTE: These settings and methods work best for simple droplet shapes. If you want something more advanced, you may want to forget the Spherize filter and reduce the Fill Opacity to 0%. This will also allow you to do multiple droplets at once, or complex letter shapes. section and enter in these settings too. Please note that the



Step 4: If you still have a selection active, lose it. Then select the [Only registered and activated users can see links. ] with a medium-sized brush set to 50% strength, and blur the bottom left edges of the droplet. Real water droplets, of course, do not have sharp edges, so this is a cosmetic adjustment that can improve the realism of the final result greatly, especially with the smaller size droplets.




Step 5: Hold CTRL and click the droplet layer again to form a selection around the water droplet. Create a new transparent layer on top of all the others, call it reflection or something else appropriate, and make it the active layer. After you have done this, take the [Only registered and activated users can see links. ], set it to a linear white-to-translucent gradient, and drag the cursor diagonally inside the droplet to create a simple gradient like the one on the left.



Step 6: Choose Edit > Transform > Scale from the main menu and reduce the height and width to 80% of their original size. Set the reflection layer opacity to 80%. Then, using the cursor keys, move the light reflection a little towards the top left of the droplet. And that's it - you've made a realistic water droplet!


Credits:
Want more? [Only registered and activated users can see links. ]

[sparkle]

o_o ooh nice effect!

[ElderKain]

very realistic effect, there is only 1 problem that doesn't make it as realistic.
to make it more realistic, there needs to be a water distortion view of the leaf in the water droplet. like in the first selection area, copy from the stock with a internal feather of like 5-10, then move that coppied selection like 3-4 pixels toward the top right side. That way it would show some water distortion.

other than that, it's a very nice tutorial tip ^.^